Casio ClassPad Manager Version 3.0 User Manual
Page 55
E-53
20060301
To draw this
type of fi gure:
Click this
button:
And perform this
operation in the drawing
area:
Which will do this in the drawing
area:
ellipse
b
Click one point and then
another point.
(You could also drag from
one point to the next.)
Draw an ellipse inscribed in a rectangle
whose opposite angles are at the two
points.
polygon
X
Sequentially click points
you want to specify as
vertices of the polygon.
Draw a polygon by attaching the current
click point with the last click point. The
fi rst click point and last click point are
always connected by a straight line.
Note
• After you are fi nished using a drawing tool, click the
G button or select a different drawing tool.
• Right after you draw a fi gure there will be points (small o points) indicating the points you specifi ed
when drawing it. You can drag these points to resize or reshape the fi gure, if you want.
The small o points will disappear when you start drawing another fi gure with the same drawing tool
or if you select a different tool.