Epson USN 52L - Manual (Page 47)

5-2 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
5.1 Function overview
(first operating level)
In the first operating level you will find all functions
required for basic adjustment of the USN 52R/USN 52L.
They are compiled into function groups allocated to
certain operation tasks.
In order to change between the function groups, press
J or C.
Function group Contents
BASIC Here you can enter the basic settings
for the measurement
RCVR Here you can set the functions of the
receiver.
PULS In this group you will find the functions
for DUAL/SINGLE changeover
GATE Contains all functions for adjusting the
positions of both gates.
S-CAL Contains all functions for the calibration
of the digital sound path measurement.
MEM Contains functions for storing your data
into the memory.
TCG You can use these functions to operate
the DAC/TCG.
Operation
Function overview
5-2 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
5.1 Function overview
(first operating level)
In the first operating level you will find all functions
required for basic adjustment of the USN 52R/USN 52L.
They are compiled into function groups allocated to
certain operation tasks.
In order to change between the function groups, press
J or C.
Function group Contents
BASIC Here you can enter the basic settings
for the measurement
RCVR Here you can set the functions of the
receiver.
PULS In this group you will find the functions
for DUAL/SINGLE changeover
GATE Contains all functions for adjusting the
positions of both gates.
S-CAL Contains all functions for the calibration
of the digital sound path measurement.
MEM Contains functions for storing your data
into the memory.
TCG You can use these functions to operate
the DAC/TCG.
Operation
Function overview