Magnum Energy ME Series - Manual (Page 10)

©
2012 Magnum Energy, Inc Page 2
Introduction
1.1 Features and Benefi ts
The ME Series inverter/charger is designed to allow easy access to wiring, circuit breakers, and
controls. Its die cast baseplate with one-piece aluminum cover ensures maximum durability with
minimum weight, as well as cooler, more effi cient operation.
The front of the ME Series is equipped with the following features (see Figures 1-1 and 1-2):
1
Power ON/OFF Switch – a momentary pushbutton switch that alternately turns the inverter
on or off.
2
Status LED Indicator – this green LED illuminates to provide information on the inverter
or charger operation.
3
Stack/Accessories Connection Port (red label) – a RJ11 port that accepts optional
accessories.
Info: The stacking feature is NOT available with the ME Series.
4
Network Connection Port (green label) – a RJ11 port that accepts optional network
capable accessories (e.g., Auto Gen Start or Battery Monitor).
5
Remote Connection Port (blue label) – a RJ11 port that allows an optional remote
control to be connected.
6
BTS Connection Port (yellow label) – RJ11 port that accepts the remote Battery
Temperature Sensor (BTS).
Figure 1-1, Power Switch, Status LED, and Accessory Connection Ports
Power ON/OFF Switch
Status LED Indicator
(Charging/Inverting)
Stack/Accessories Port
(red label – RJ11 connection)
Network Port
(green label – RJ11 connection)
Remote Port
(blue label – RJ11 connection)
Battery Temp Sensor Port
(yellow label – RJ11 connection)
6
4
3
2
1
5