KACO Powador Argus 16S DCS - Manual (Page 7)

Safety
Operating Instructions Powador Argus 16S DCS, 24S DCS_EN Page 7
2.1 Proper use
This unit is used to monitor and combine the individual string leads of a photovoltaic (PV) system. The Powador
Argus string monitoring box is built according to the state of the art and recognised safety rules. Nevertheless,
improper use may cause lethal hazards for the operator or third parties, or may result in damage to the units
and other property.
The string monitoring box may be powered only by a permanent connection to the public electricity grid. The
string monitoring box is not intended for mobile use. Any other or additional use of the device is deemed improper.
The manufacturer/supplier is not liable for damage caused by such use. Damage caused by improper use is at the
sole risk of the operator.
Proper use also includes adherence to the operating and installation instructions. Your authorised electrician will
register with your energy supplier and obtain approval for your photovoltaic system from the supply grid operator
on your behalf. Some of the documents required to register your photovoltaic system and have it approved are
included with the installation instructions.
2.2 Standards and directives
The string monitoring box is labelled with the CE marking.
The unit complies with the following standards and directives:
2006/95/EC
Directive relating to electrical
equipment designed for use
within certain voltage limits
Safety of the unit IEC 62109-1:2010
NOTICE
The declaration of conformity can be found in the appendix.