Yaskawa DriveWizard AC Drive - Manual (Page 9)

Introduction to DriveWizard ™
New Features for DriveWizard
™ 6.1
• G5 to G7 File Conversion Tool.
This feature allows the user to convert a previously saved standard G5 drive
DriveWizard
™ parameter file into a standard G7 drive DriveWizard ™ parameter file.
• GPD505/P5 & GPD506/P5+ to E7 & P7 Conversion Tool.
This feature allows the user to convert a previously saved standard GPD505/P5 or
GPD506/P5+ drive parameter file in InverterWin 3.0 into a standard E7 or P7
DriveWizard
™ drive parameter file.
• Enhanced Ethernet drive multiple IP address storage.
This feature allows the user to create a list of IP addresses as long as they wish to select a
drive to connect to in Ethernet communications. The drives can also have a tag name up
to 32 characters associated with it’s IP address to easily find a particular drive in a long
list of IP addresses.
• Support for Ethernet Modbus TCP/IP and Ethernet/IP
Both Ethernet protocols are now supported in DriveWizard ™ .
• Drive Write Protect added.
This feature allows the user to set a password and enable the write protect function.
When this function is turned on, the user of DriveWizard
™ can only monitor the drive,
view drive parameters, and upload parameters from the drive. You cannot change any
parameters, download parameter files, initialize the drive, reset the drive, or utilize
RunWizard.
• Drive Remote Reset Capability
The ability to reset a drive fault while on-line with DriveWizard ™ has been added.
• E7+ / P7+ Database
This additional database supports the new featured E7+ 4010 software and the P7+ 1020
software’s.
• Standard G7 CASE database
This feature adds G7 CASE support by additional DriveWizard ™ database supplied with
the software.
• V7 Ethernet Database
This feature adds GPD315/V7 support for Ethernet when using a CMO9x
communications option for GPD315/V7 by an additional DriveWizard
™ database
supplied with the software.
9