Yaskawa DriveWizard AC Drive - Manual (Page 105)

Introduction
Introduction
The graphing function in DriveWizard
™ is used to collect and display data from the drive in a
graphical format.. Up to 8 monitor values can be graphed at the same time. These monitor values
can be any item available from the monitoring function (see Chapter 5). The time base for
sampling is settable by the user in 1,10, 30, and 60 second intervals under serial communications
and 0.1,1.0, 10.0, 30.0 and 60.0 second under Ethernet communications. The graphing display
can be re-sized to expand or shrink either the X or Y axis of the display.
Figure 7.1: Sample of the Graphing Area
105