Yaskawa DriveWizard AC Drive - Manual (Page 72)

Inverter Menu
To change the function of write disable, you click on Inverter> Write Disable Password and you
have to enter the correct password to change the function. This can be done either on-line or off-
line. The Window is grayed out until the correct password is given (Figure 4.45). Once the
correct password is entered, make the changes required and click on OK to change the function
and close the window. If the password is lost, re-installing DriveWizard
™ will reset the function
to off and reset the password to not used.
Figure 4.45: Write Password Set Window with Password set
72