Activating run wizard – Yaskawa DriveWizard AC Drive User Manual

Page 120

Text mode
Original mode

Activating Run Wizard

The Run Wizard allows remote control of a drive. This feature is only available after
communication with the drive has been established, and it has been enabled. The following
sections illustrate the use of this feature.

1. Connect the drive to the PC as described in Chapter 3

2. If parameters need to be changed, do this now (refer to Chapter 8: Parameter Editor)
3. Click on the

Enable

button in the Run Wizard (Figure 8.3a)

4. If this is the first time you are enabling Run Wizard the warning in Figure 8.1 will appear.

Click on

to continue, click

Decline

to stop the function.

5. The warning message in Figure 8.2 will appear. Click

to continue.

Figure 8.1: Initial Run Wizard Warning Window

Figure 8.2: Run Wizard Warning Window

Activating Run Wizard

120