Yaskawa DriveWizard AC Drive - Manual (Page 140)

G PD5 Conve Ta
Table 1: Parameter Conversion
PD 505/P5 to E7 and G 05/P5 to P7 rsion bles
P5
Par.
P5 Parameter Name Conversion E7/P7
Par.
E7/P7 Parameter
Name
n001 Param selection/ init NVERTED NOT CO NA NA
n002 Op Mode Select See Table 2 b1-01 &
b1-02 Run Seq Select
Ref Select
n003 Motor Rated Voltage n003/10 = E1-01 E1-01 Input Voltage
n004 Stop Method If n004 > 1, then b1-03 =3,
else n004 = b1-03 b1-03 Stopping Method
n005 Phase Rotation
n006 Reverse Prohibited
See Table 3 b1-04 Reverse operation
n007 Local/Remote None o2-01 Local / Remote Key
n008 Stop Key Function o2-02 None
n009 Freq Ref Setting from
Digital Operator If n009=1, then o2-05=0,
else o2-05 = 1
o2-05 Freq Ref Setting Method
Selection
n010 V/F Pattern Select NOT CONVERTED NA NA
n011 Motor Rated Voltage NOT CONVERTED NA NA
n012 Max Frequency If n012 > 120.0 then E1-04
=120.0, else n012 = E1-04 E1-04 Max Output Freq.
n013 Max voltage None E1-05 Output Voltage Max
n014 Base Frequency If n014 > 200.0 then E1-06
=200.0, else n014 = E1-06 E1-06 Base Frequency
n015 Mid Frequency If n015 > 200.0 then E1-07
=200.0, else n015 = E1-07 E1-07 Mid Frequency
n016 Mid voltage None E1-08 oltage A Mid V
n017 Min Frequency None E1-09 Min Frequency
n018 Min Voltage None E1-10 ltage Min Vo
n019 Accel Time 1 If n019 > 999.9, then
n019*10 = C1-01, else n019
= C1-01 C1-01 Acceleration Time 1
n020 Decel Time 1 If n020 > 999.9, then
n020*10 = C1-02, else n020
= C1-02 C1-02 Deceleration Time 1
n021 Accel Time 2 If n021 > 999.9, then n021
*10 = C1-03, else n021 =
C1-03 C1-03 Acceleration Time 2
n022 Decel Time 2 If n022 > 999.9, then
n022*10 = C1-04, n022 =
C1-04 C1-04 Deceleration Time 2
n023 S-curve select NOT CONVERTED NA NA
n024 Operator Display Units If n024 >39 then n024*10 =
o1-03, else n024 = o1-03 o1-03 Digital Operator Display
Selection
n025 Freq Reference #1 n025*10 = d1-01 d1-01 Frequency Reference 1
n026 Freq Reference #2 n026*10 = d1-02 d1-02 Frequency Reference 2
n027 Freq Reference #3 n027*10 = d1-03 d1-03 Frequency Reference 3
n028 Freq Reference #4 n028*10 = d1-04 d1-04 Frequency Reference 4
n029 Jog Reference n029*10 = d1-17 d1-17 Jog Freq. reference
n030 Freq Ref Upper Limit n030*10 = d2-01 d2-01 Freq Ref. Upper Limit
n031 Freq Ref Lower Limit n031*10 = d2-02 d2-02 Freq. Ref. Lower Limit
n032 Motor Rated Current None E2-01 Motor Rated Current
140