Yaskawa F7 to A1000 - Manual (Page 55)

10 Appendix 2 Parameter Cross Reference
YASKAWA PL.A1000.02 F7 to A1000 - Product Transition Guide 55
Multi-Function
Selection
LOCAL/REMOTE
Key Function
Selection
o2-01 1 o2-01 1
o2-01 o2-01
0: Disabled 0: Disabled
1: Enabled 1: Enabled
STOP Key
Function Selection
o2-02 1 o2-02 1
o2-02 o2-02
0: Disabled 0: Disabled
1: Enabled 1: Enabled
User Parameter
Default Value
o2-03 0 o2-03 0
o2-03 o2-03
0: No change 0: No change
1: Set defaults 1: Save values
2: Clear all 2: Clear all
Drive Model
Selection
o2-04 * o2-04 *
Do not change this setting. Varies by kVA
Determined by drive capacity.
Frequency
Reference Setting
Method Selection
o2-05 0 o2-05 0
o2-05 o2-05
0: ENTER required 0: ENTER required
1: ENTER key not
required
1: ENTER key not required
Operation
Selection when
Digital Operator is
Disconnected
o2-06 0 o2-06 1
o2-06 o2-06
0: Disabled
0: Continues operation if digital operator is
disconnected
1: Enabled
1: An oPr fault is triggered and the motor coasts to a
stop
Cumulative
Operation Time
Setting
o2-07 0 o4-01 0 h —
Cumulative
Operation Time
Selection
o2-08 0 o4-02 0
o2-08 o4-02
0: Power on time 0: Logs power-on time
1: Running time 1: Logs operation time when the drive output is active
Initialization
Specification
Selection
o2-09 1 o2-09 * *Do not change this setting. Factory use only
Fan Operation
Time
(A1000: Cooling
Fan Operation
Time Setting)
o2-10 0 o4-03 0 h
F7 Setting Range : 0 to 65535
A1000 Setting Range : 0 to 9999
Multi-Function
Selection
Fault Trace/Fault
History Clear
Function (A1000:
U2, U3
Initialization)
o2-12 0 o4-11 0
o2-12 o4-11
0: No change 0: No change
1: Reset U2, U3
parameters
1: Reset U2, U3 parameters
kWh User Monitor
Initialization
o2-14 0 o4-12 0
o2-14 o4-12
0: No change 0: No change
1: U1-29 and o2-14 are
reset to zero
1: U4-10 and U4-11 are reset
Copy Function
Copy Function
Selection
o3-01 0 o3-01 0
o3-01 o3-01
0: COPY SELECT 0: No action
1: READ 1: Read LCD operation
2: COPY 2: Write to the drive
3: VERIFY 3: Verify
Copy Allowed
Selection
o3-02 0 o3-02 0
o3-02 o3-02
0: Read prohibited 0: Read prohibited
1: Read allowed 1: Read allowed
Parameter Name
F7 A1000 Setting
Parameter Default Parameter Default F7 A1000