Yaskawa F7 to A1000 - Manual (Page 47)

10 Appendix 2 Parameter Cross Reference
YASKAWA PL.A1000.02 F7 to A1000 - Product Transition Guide 47
Analog Input
Terminal A1
Signal Level
Selection
H3-01 0 H3-01 0
Terminal A1 in A1000 is multi-functional.
H3-01 H3-01
0: 0 to +10 V 0: 0 to +10 V (uses lower limit)
1: -10 to 10 V 1: -10 to 10 V (no lower limit)
Terminal A1
Function Selection
─ ─ H3-02 0 For A1000, set H3-02 to 0.
Terminal A1 Gain
Setting
H3-02 100.0%
H3-03 100.0 % —
F2-02 100.0 %
Set this parameter when using an analog option card to determine the gain added to
the analog reference.
Terminal A1 Bias
Setting
H3-03 0.0%
H3-04 0.0 %
F2-03 0.0 %
Set this parameter when using an analog option card to determine the gain added to
the analog reference.
Terminal A3
Signal Level
Selection
H3-04 0 H3-05 0
H3-04 H3-05
0: 0 to +10 V 0: 0 to +10 V (uses lower limit)
1: -10 to 10 V 1: -10 to 10 V (no lower limit)
Terminal A3
Function Selection
H3-05 2 H3-06 2
H3-05, H3-09 H3-06, H3-10
0: Terminal A1 bias 0: Frequency bias
1: Frequency reference
gain
1: Frequency gain
2: Auxiliary freq ref 1 2: Auxiliary freq ref 1
3: Auxiliary freq ref 2 3: Auxiliary frequency reference 2
4: Output voltage bias 4: Output voltage bias
5: Accel/decel time
coefficient
5: Accel/decel time gain
6: DC Injection Braking
current
6: DC Injection Braking current
7: Torque detection level 7: Torque detection level
8: Stall Prevention level
during run
8: Stall Prevention level during run
9: Frequency Ref. lower
limit
9: Output freq lower limit level
A: Jump frequency 4 —
B: PID feedback B: PID feedback
C: PID setpoint C: PID setpoint
D: Frequency Reference
bias 2
D: Frequency bias
E: Motor temperature E: Motor temperature
F: Through- mode F: Through- mode
Parameter Name
F7 A1000 Setting
Parameter Default Parameter Default F7 A1000