SMA SSM-U-1615 - Manual (Page 23)

Observe minimum clearances:
Figure 9: Minimum clearances
Position Explanation
A 200 mm
B 650 mm
C 800 mm
D 150 mm
E 650 mm
5.2 Mounting the SMA String-Monitor on the Wall
Risk of injury when lifting the DC sub-distribution, or if it is dropped
There is risk of injury if the DC sub-distribution is lifted incorrectly or dropped while being
transported or when attaching it to or removing it from the wall mounting bracket. Weight of the
DC sub-distribution without installed accessories: 35 kg.
• Two persons are required for mounting and disassembling the DC sub-distribution.
• Carefully lift and transport the DC sub-distribution.
Additionally required mounting material (not included in the scope of delivery):
• For mounting the DC subdistribution on a wall:
– 4 screws M6. Take the wall properties into account when selecting the screws.
– 4 washers
5 Mounting SMA Solar Technology AG
Operating Manual 23 SSMUXX15-BE-en-10