SMA SI-TB-BOX-10 User Manual
SMA Equipment
Table of contents
Document Outline
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Description
- 5 Mounting
- 6 Electrical Connection
- 6.1 Safety during Electrical Connection
- 6.2 Overview of the Connection Area
- 6.3 Selecting Cables
- 6.4 Inserting the Cables
- 6.5 Connecting Insulated Conductors to Spring Clamp Terminals
- 6.6 Connecting Loads
- 6.7 Connecting the PV Plant
- 6.8 Connecting the Generator or Power Distribution Grid
- 6.9 Connecting the Sunny Island
- 6.10 Connecting the Load-Shedding Contactor
- 7 Commissioning
- 8 Setting the Operating Mode via the Bypass Switch
- 9 Mounting and Disassembling the Contact Hazard Protection Cover
- 10 Disconnecting the Smartformer from the Power Supply
- 11 Cleaning
- 12 Troubleshooting
- 13 Decommissioning
- 14 Technical Data
- 15 Compliance Information
- 16 Contact