SMA SI-TB-BOX-10 - Manual (Page 30)

5 Mounting SMA America, LLC
30 SI_TDBOX-IA-eng-IUS122211 Installation Manual
6. Tighten the screws in the wall firmly. Use a torque wrench with a suitable attachment and adhere
to the maximum torque specified for the screws used.
5.
Risk of injury due to falling Smartformer
Due to its heavy weight, the Smartformer can crush or break bones if it falls.
• Hang the Smartformer onto the screws and
carefully slide it into the guides of the
anchorage brackets. When doing so, note
that the weight of the Smartformer is
132
1
⁄
2
lbs. (60 kg) and make sure that the
Smartformer does not tilt or slip out of place
during mounting.