SMA SI-TB-BOX-10 - Manual (Page 27)

SMA America, LLC 5 Mounting
Installation Manual SI_TDBOX-IA-eng-IUS122211 27
• Tighten the hexagon socket screw
(torque: 88 in-lbs. (10 Nm)).
Use a torque wrench with an attachment for
hexagon socket screws
3
⁄
16
in. (5 mm).
5. Turn the Smartformer by 180°.
6. 2 position anchorage brackets on the upper drill
holes in the enclosure rear wall. When doing so,
keep the anchorage brackets in the chosen position
and align the metal bars of the anchorage bracket
with the enclosure door.
7. Screw on both anchorage brackets.
• Insert the hexagon socket screw with the sealing
ring through the drill hole from the inside and
into the thread of the anchorage bracket.
• Tighten the hexagon socket screw
(torque: 88 in-lbs. (10 Nm)).
Use a torque wrench with an attachment for
hexagon socket screws
3
⁄
16
in. (5 mm).