SMA SI-TB-BOX-10 - Manual (Page 51)

SMA America, LLC 9 Mounting and Disassembling the Contact Hazard Protection Cover
Installation Manual SI_TDBOX-IA-eng-IUS122211 51
9 Mounting and Disassembling the Contact Hazard
Protection Cover
Danger to life due to electric shock
High voltages that can result in electric shocks are present in the live components of the
Smartformer.
• Disconnect the Smartformer from the power supply before performing any work on the
Smartformer (see Section 10).
• Always use a contact hazard protection cover when operating the Smartformer.
• Work on the Smartformer may only be performed by a skilled worker.
• Do not touch live components of the Smartformer or other components of the Sunny Island
system.
Risk of burns due to hot components
Components inside the Smartformer may become hot during operation.
• Always use a contact hazard protection cover when operating the Smartformer.
• Allow the Smartformer to cool down before removing the contact hazard protection cover.