SMA SI-TB-BOX-10 - Manual (Page 63)

SMA America, LLC 13 Decommissioning
Installation Manual SI_TDBOX-IA-eng-IUS122211 63
6. Release insulated conductors from the screw terminals of the miniature circuit-breakers "F4",
"F5", "F6" and "F7".
7. Remove all connection cables from the Smartformer.
8. Loosen 4 screws in the wall.
9. Take the Smartformer off the wall and set it down.
10. Unscrew 4 screws from the wall.
11. Release screws of the 4 anchorage brackets on the Smartformer and remove anchorage
brackets.
12. Mount the contact hazard protection cover (see Section 9.2).
13. Close the enclosure door using the door handles.
13.2 Storing the Smartformer
• Store the Smartformer in a dry place where the ambient temperature is always between
− 13°F ( − 25°C) and +140°F (+60°C).
• Store the Smartformer in closed packaging.
13.3 Packaging the Smartformer
• Package the Smartformer and the 4 anchorage brackets. Use the original packaging for this or
packaging suitable for the weight and dimensions of the Smartformer (see Section 14
"Technical Data", page 64).
13.4 Disposing of the Smartformer
• Dispose of the Smartformer in accordance with the locally applicable disposal regulations for
electronic waste.
or
• Send the Smartformer to SMA at your own expense (see Section 16 "Contact", page 71).
When doing so, label the packaging with the information "FOR DISPOSAL".