SMA STP 5000TL - Manual (Page 7)

2 Safety
2.1 Intended Use
The Sunny Tripower is a transformerless PV inverter with two MPP trackers which converts the direct
current of the PV array to grid-compliant three-phase current and feeds it into the utility grid.
The product is suitable for indoor and outdoor use.
The product must only be operated with PV arrays of protection class II, in accordance with
IEC 61730, application class A. The PV modules must be suitable for use with this product.
PV modules with a high capacity to ground must only be used if their coupling capacity does not
exceed 1.25 μF (for information on how to calculate the coupling capacity, see the Technical
Information "Leading Leakage Currents" at www.SMA-Solar.com).
All components must remain within their permitted operating ranges at all times.
The product must only be used in countries for which it is approved or released by SMA Solar
Technology AG and the grid operator.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Making unauthorized changes will void the warranty
and will normally result in invalidation of the operating permit. SMA Solar Technology AG shall not
be held liable for any damage caused by such changes.
Any use of the product other than described in the Intended Use section does not qualify as
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
2.2 Skills of Qualified Persons
Only qualified persons are allowed to perform the activities marked in this document with a
warning symbol and the caption "Qualified person". Qualified persons must have the following
skills:
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated with installing and using
electrical devices and systems
• Training in the installation and commissioning of electrical devices and systems
• Knowledge of the applicable standards and directives
• Knowledge of and compliance with this document and all safety precautions
2 Safety SMA Solar Technology AG
Operating Manual 7 STP5-10TL-20-BE-en-13