SMA STP 5000TL - Manual (Page 15)

Symbol Explanation
CE marking
The product complies with the requirements of the applicable EU direc-
tives.
Device class ID
The product is equipped with a wireless component and complies with
device class 2.
Degree of protection IP65
The product is protected against dust intrusion and water jets from any
angle.
The product is suitable for outdoor installation.
RAL quality mark for solar products
The product complies with the requirements of the German Institute for
Quality Assurance and Certification.
Certified safety
The product is VDE-tested and complies with the requirements of the Ger-
man Equipment and Product Safety Act.
C-Tick
The product complies with the requirements of the applicable Australian
EMC standards.
4.2 Interfaces and Functions
The inverter can be equipped with the following interfaces and functions:
Bluetooth
Via Bluetooth, the inverter can communicate with various Bluetooth devices (for information on
supported SMA products, see www.SMA-Solar.com).
SMA Speedwire/Webconnect
SMA Speedwire/Webconnect is a type of communication based on the Ethernet standard, and
allows you to connect the inverter to a Speedwire network. Webconnect allows for data exchange
between the inverter and Sunny Portal. Sunny Portal is an Internet portal which allows you to
monitor PV systems and to visualize and present PV system data.
4 Product Description SMA Solar Technology AG
Operating Manual 15 STP5-10TL-20-BE-en-13