SMA STP 5000TL - Manual (Page 20)

Permitted and prohibited mounting positions:
☐ The inverter must be mounted in one of the permitted positions. This will ensure that no
moisture can penetrate the inverter.
☐ The inverter should be mounted at eye level. This will ensure that display messages and LED
signals can be read without difficulty.
Figure 5: Permitted and prohibited mounting positions
5.2 Mounting the Inverter
Additionally required mounting material (not included in the scope of delivery):
☐ At least two screws that are suitable for the support surface and the weight of the inverter
☐ At least two washers that are suitable for the screws
☐ Two screw anchors that are suitable for the support surface and the screws, if necessary
☐ To protect the inverter against theft: A least one safety screw and if necessary, a suitable screw
anchor
5 Mounting SMA Solar Technology AG
Operating Manual STP5-10TL-20-BE-en-13 20