SMA STP 5000TL - Manual (Page 49)

Position Symbol Explanation
Q - Diagram with the power curve of the last 16 feed-in hours or
energy yields of the last 16 days
• In order to switch between the displays, tap once on the
enclosure lid.
R You can operate the display by tapping on the enclosure lid
(see Section 9.3, page 49).
The displayed error must be rectified on-site by a qualified per-
son (for troubleshooting, see service manual at www.SMA-So-
lar.com).
The displayed error cannot be rectified on-site.
• Contact the SMA Service Line.
9.2 LED Signals
The LEDs indicate the operating state of the inverter.
LED Status Explanation
Green LED glowing Operation
flashing The requirements for the connection to the utility
grid have not been met.
Red LED glowing An error has occurred that must be rectified by a
qualified person (for troubleshooting, see ser-
vice manual at www.SMA-Solar.com).
Blue LED glowing Active communication via Bluetooth
9.3 Activating and Operating the Display
You can activate and operate the display by tapping on the enclosure lid.
1. Activate the display. Tap on the enclosure lid once.
☑ The backlight is switched on.
2. To move to the next line, tap on the enclosure lid once.
3. In order to switch between the power curve of the last 16 feed-in hours and the energy yields
of the last 16 days in the diagram, tap on the enclosure lid once.
9 Operation SMA Solar Technology AG
Operating Manual 49 STP5-10TL-20-BE-en-13