HEIDENHAIN iTNC 530 (340 49x-02) - Manual (Page 7)

HEIDENHAIN iTNC 530 7
Feature content level (upgrade functions)
Along with software options, significant further improvements of the
TNC software are managed via the Feature Content Level. Functions
subject to the FCL are not available simply by updating the software
on your TNC. These functions are identified in the manual with FCL n,
where n indicates the sequential number of the feature content level.
You can purchse a code number in order to permanently enable the
FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
Location of use
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55022, and is intended for use primarily
in industrially-zoned areas.
FCL-2 functions Description
3-D line graphics page 128
Virtual tool axis page 80
USB support of block devices (memory
sticks, hard disks, CD-ROM drives) page 113
Filtering of externally created contours page 514
Possibility of assigning different depths
to each subcontour in the contour
formula page 433
DHCP dynamic IP-address
management page 617
Touch-probe cycle for global setting of
touch-probe parameters User's Manual - Touch
Probe Cycles
smarT.NC: Graphic support of block
scan smarT.NC Pilot
smarT.NC: Coordinate transformation smarT.NC Pilot
smarT.NC: PLANE function smarT.NC Pilot