HEIDENHAIN iTNC 530 (340 49x-02) - Manual (Page 485)

HEIDENHAIN iTNC 530 485
9.1 The PLANE F
unction: Tilting the W
o
rk
ing Plane (Sof
tw
ar
e
O
ption
1
)
Reset the PLANE function
8 Show the soft-key row with special functions
8 Select special TNC functions: Press the
SPECIAL TNC FUNCTIONS soft key.
8 Select the PLANE function: Press the TILT
MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row.
8 Select the Reset function. This internally resets the
PLANE function, but does not change the current axis
positions.
8 Specify whether the TNC should automatically move
the rotary axes to the default setting (MOVE or TURN) or
not (STAY) (see “Automatic positioning: MOVE/TURN/
STAY
(entry is mandatory)” on page 499).
8 To terminate entry, press the END key.
Example: NC block
25 PLANE RESET MOVE SET UP 50 F1000
The PLANE RESET function resets the current PLANE
function—or an active Cycle 19—completely (angles = 0
and function is inactive). It does not need to be defined
more than once.