HEIDENHAIN iTNC 530 (340 49x-02) - Manual (Page 550)

550 11 Programming: Q Parameters
1
1
.8 A
d
ditional F
unctions
In the part program, program FN 16: F-PRINT, to activate the
output:
The TNC then outputs the file PROT1.TXT through the serial interface:
CALIBRAT. CHART IMPELLER CENTER GRAVITY
DATE: 27:11:2001
TIME: 8:56:34
NO. OF MEASURED VALUES : = 1
*******************************************
X1 = 149.360
Y1 = 25.509
Z1 = 37.000
*******************************************
L_DUTCH Display the text only in Dutch conversational
language
L_POLISH Display text only in Polish conversational
language
L_HUNGARIA Display text only in Hungarian conversational
language
L_ALL Display the text independent of the
conversational language
HOUR Number of hours from the real-time clock
MIN Number of minutes from the real-time clock
SEC Number of seconds from the real-time clock
DAY Day from the real-time clock
MONTH Month as a number from the real-time clock
STR_MONTH Month as a string abbreviation from the real-
time clock
YEAR2 Two-digit year from the real-time clock
YEAR4 Four-digit year from the real-time clock
96 FN16: F-PRINT TNC:\MASKE\MASKE1.A /
RS232:\PROT1.TXT
Code word Function