HEIDENHAIN iTNC 530 (340 49x-02) - Manual (Page 433)

HEIDENHAIN iTNC 530 433
8.7 SL Cy
cles with Cont
our F
o
rm
ula
Defining contour descriptions
With the DECLARE CONTOUR function you enter in a program the path for
programs from which the TNC draws the contour descriptions. In
addition, you can select a separate depth for this contour description
(FCL 2 function):
8 Press the DECLARE soft key.
8 Press the CONTOUR soft key.
8 Enter the number for the contour designator QC, and
confirm with the ENT key.
8 Enter the full name of the program with the contour
description and confirm with the END key, or if
desired,
8 Define a separate depth for the selected contour.
With the given contour designators QC you can include the
various contours in the contour formula.
With the DECLARE STRING function you define a text. This
function is currently not evaluated.
If you program separate depths for contours, then you
must assign a depth to all subcontours (assign the depth 0
if necessary).