HEIDENHAIN iTNC 530 (340 49x-02) - Manual (Page 10)

10
TNC Model, Sof
tw
a
re
and F
eat
ur
es
Functions changed in 340 49x-01 since the
predecessor versions 340 422-xx and 340 423-xx
„ The layouts of the status display and additional status display were
redesigned (see “Status Displays” on page 44).
„ Software 340 490 no longer supports the small resolution in
combination with the BC 120 screen (see “Visual display unit” on
page 39).
„ New key layout of the TE 530 B keyboard unit (see “Operating
panel” on page 40)
„ The entry range for the EULPR precession angle in the PLANE EULER
function was expanded (see “Defining the Machining Plane with
Euler Angles: EULER PLANE” on page 490)
„ The plane vector in the PLANE EULER function no longer has to be
entered in standardized form (see “Defining the Machining Plane
with Two Vectors: VECTOR PLANE” on page 492)
„ Positioning behavior of the CYCL CALL PAT function modified (see
“Calling a cycle in connection with point tables” on page 301)
„ The tool types available for selection in the tool table were increased
in preparation for future functions.
„ Instead of the last 10, you can now choose from the last 15 selected
files (see “Choosing one of the last files selected” on page 105)