HEIDENHAIN TNC 320 (340 55x-05) ISO programming - Manual (Page 414)

414 Tables and Overviews
16.1 Mac
h
ine-Specific User P
a
ra
met
e
rs 16.1 Machine-Specific User
Parameters
Application
The parameter values are entered in the configuration editor.
The machine parameters are grouped as parameter objects in a tree
structure in the configuration editor. Each parameter object has a
name (e.g. CfgDisplayLanguage) that gives information about the
parameters it contains. A parameter object, also called "entity", is
marked with an "E" in the folder symbol in the tree structure. Some
machine parameters have a key name to identify them
unambiguously. The key name assigns the parameter to a group (e.g.
X for X axis). The respective group folder bears the key name and is
marked by a "K" in the folder symbol.
To enable you to set machine-specific functions, your
machine tool builder can define which machine
parameters are available as user parameters.
Furthermore, your machine tool builder can integrate
additional machine parameters, which are not described in
the following, into the TNC.
Refer to your machine manual.
If you are in the configuration editor for the user
parameters, you can change the display of the existing
parameters. In the default setting, the parameters are
displayed with short, explanatory texts. To display the
actual system names of the parameters, press the key for
the screen layout and then the SHOW SYSTEM NAME
soft key. Follow the same procedure to return to the
standard display.