HEIDENHAIN TNC 320 (340 55x-05) ISO programming - Manual (Page 406)

406 MOD Functions
15.5 Ether
n
et Int
e
rf
ace
Configuring network access to other devices (mount)
U Connect the TNC (port X26) with a network or a PC
U In the file manager (PGM MGT), select the Network soft key
U Press the MOD key. Then enter the keyword NET123
U Press the DEFINE NETWORK CONNECTN. soft key
U It opens the dialog window for the network configuration
Make sure that the person configuring your TNC is a
network specialist.
Not all Windows operating systems require entry of the
username,
workgroup and password parameters.
Setting Meaning
Mount device „ Connection over NFS: Directory name to be
mounted. This is formed from the network
address of the device, a colon, a slash and the
name of the directory. Entry of the network
address as four decimal numbers separated
by points (dotted-decimal notation), e.g.
160.1.180.4:/PC. When entering the path
name, pay attention to capitalization.
„ To connect individual Windows computers via
SMB: Enter the network name and the share
name of the computer, e.g. \\PC1791NT\PC
Mount point Device name: The device name entered here is
displayed on the control in the program
management for the mounted network, e.g.
WORLD: (The name must end with a colon!)
File system File system type:
„ NFS: Network File System
„ SMB: Windows network
NFS option rsize: Packet size in bytes for data reception
wsize: Packet size for data transmission in
bytes
time0=: Time in tenths of a second, after which
the control repeats an unanswered Remote
Procedure Call.
soft: If YES is entered, the Remote Procedure
Call is repeated until the NFS server answers. If
NO
is entered, it is not repeated.