HEIDENHAIN TNC 320 (340 55x-05) ISO programming - Manual (Page 11)

HEIDENHAIN TNC 320 11
New F
u
nctions of Sof
tw
a
re
340
55x
-05
New Functions of Software 340 55x-05
„ The M101 function was introduced (see "Automatic tool change if the
tool life expires: M101" on page 146).
„ Tool tables of the iTNC 530 can now be imported in the TNC 320 and
converted to a valid format (see "Importing tool tables" on page 140).
„ The CYCL CALL POS function was introduced (see User's Manual for
Cycles).
„ Local and nonvolatile QL and QR Q parameters were introduced (see
"Principle and Overview" on page 202).
„ You can now perform a tool usage test before starting the program
(see "Tool usage test" on page 148).
„ The M138 "Selection of swivel axes" function was introduced (see
"Selecting tilting axes: M138" on page 323).
„ File functions were introduced (see "File Functions" on page
HIDDEN).
„ The "Define coordinate transformations" function was introduced
(see "Defining Coordinate Transformations" on page HIDDEN).
Changed Functions of Software
340 55x-05
„ The status display for Q parameters was improved (see "Checking
and Changing Q Parameters" on page 211).
„ The LAST_USE column was added to the tool table (see "Tool table:
Standard tool data" on page 134).
„ The graphic simulation was enhanced and adapted to the iTNC 530
(see "Graphics" on page 368).
„ Touch probe cycles can now also be used in the tilted working plane
(see User's Manual for Cycles).