HEIDENHAIN TNC 320 (340 55x-03) Touch Probe Cycles - Manual (Page 63)

HEIDENHAIN TNC 320 63
3.2 Pr
eset
ting aut
o
matically
Characteristics common to all touch probe
cycles for datum setting
Datum point and touch probe axis
From the touch probe axis that you have defined in the measuring
program the TNC determines the working plane for the datum:
You can also run the touch probe cycles 408 to 419 during
an active basic rotation.
The tilting the working plane function is not permitted in
combination with cycles 408 to 419.
When running touch probe cycles, no cycles must be
active for conversion of coordinates (Cycle 7 DATUM,
Cycle 8 REFLECTION, Cycle 10 ROTATION, Cycles 11 and
26 SIZE FACTOR and Cycle 19 WORKING PLANE).
Active touch probe axis Datum setting in
Z X and Y
Y Z and X
X Y and Z