Grass Valley NV8500 Series v.3.5 - Manual (Page 55)

39
NV8500 Series
User’s Guide
This is the ordering of slots for output port numbering:
Fig. 2-8: NV8576-Plus Slot Order for Output Port Numbering
The video port ordering is the same for frame 2 of an expanded NV8576-Plus, but the video port
numbering ranges from 577 to 1152 instead of from 1 to 576.
I/O Backplanes
Signals are received and distributed through backplanes installed in the rear of the router frame.
For proper operation, each backplane must match its corresponding input card or output card.
That means a coax backplane must match a coax I/O card and a fiber optic backplane must
match a fiber optic I/O card.
However, a coax input backplane can match a standard input card (video or AES), a disem-
bedder card, or a 3Gig/TDM (MADI) card, as long as the card is also designated “coax.”
Standard and hybrid I/O cards can use the same backplanes for similar signals.
Fiber optic cards and backplanes are not used for hybrid I/O.
See Chapter 5, Monitoring on page 89 for information about monitor cards and their
backplanes.
Expansion Outputs
Expansion Outputs
INPUTS
INPUTS
(lower bay)
(upper bay)
Video Ports 289–432 Video Ports 1–144
Video Ports 433–576 Video Ports 145–288
63 61 60 59 58 57 64 62
47 45 44 43 42 41 48 46
31 29 28 27 26 25 32 30
15 13 12 11 10 9 16 14
55 53 52 51 50 49 56 54
39 37 36 35 34 33 40 38
23 21 20 19 18 17 24 22
7 5 4 3 2 1 8 6
Output Cards
Output Cards
Output Cards
Output Cards
Output Cards
Output Cards
Output Cards
Output Cards
15 13 12 11 10 9 16 14 7 5 4 3 2 1 8 6
47 45 44 43 42 41 48 46 39 37 36 35 34 33 40 38 63 61 60 59 58 57 64 62 55 53 52 51 50 49 56 54
31 29 28 27 26 25 32 30 23 21 20 19 18 17 24 22