Inputs and outputs, Types of input and output, 2 inputs and outputs – Grass Valley NV8500 Series v.3.5 User Manual
Page 37: Topics

21
Inputs and Outputs
I/O modules include input cards, output cards, and their backplanes. Input cards receive
incoming signals through connectors on their backplanes and forward them to crosspoint
cards. The crosspoint cards route the signals, as directed by the control card, to output cards.
The signals are then distributed from the output card through connectors on their backplanes.
For a comprehensive list of I/O modules and corresponding backplanes with part numbers, see
Topics
Types of Input and Output
Although this chapter discusses each card type and its signal numbering in detail, here it
presents a tabular view of the cards:
Input Card Type
Signals
Remarks
Standard HD input
9 video.
18, video (NV8140)
Accepts HD or SD; coax
Standard 3Gig input
9 video;
18 video (NV8140)
Accepts 3Gig, HD, or SD; coax or fiber
AES async input
a
a. The NV8140 does not support AES async.
9 audio
Accepts AES pairs; coax or shielded twisted pair
(STP)
Disembedder
8 video;
16 video (NV8140)
Accepts 3Gig, HD, or SD, coax only; 16 embedded
audio channels for each video port
Frame sync
(disembedder)
8 video
Accepts 3Gig, HD, or SD, coax only; 16 embedded
audio channels for each video port; RJ-45 port for
configuring frame sync functions.
IP gateway
(disembedder)
8 video
Receives packetized video (via 10GE SFPs).
Accepts 3Gig, HD, or SD; 16 embedded audio
channels for each video stream; RJ-45 port for
configuring IP functions.
3Gig/TDM input
8 video + 1 MADI;
16 video + 2 MADI (NV8140)
Accepts 3Gig, HD, or SD and MADI stream(s) up
to 64 channels; coax only