Timing – Grass Valley NV8500 Series v.3.5 User Manual
Page 168
152
Frame Sync Cards
Configuration in iControl-Solo
The double arrows move the gain values in increments of 25 units. The single arrows, in all cases,
move the adjustment value in increments of 1 unit. You can also slide the indicators manually
for gross adjustment.
Note that changing any of the RGB values also changes the overall gain.
This is the ‘Advanced’ tab:
The double arrows move the gain values in increments of 25 units. The double arrows move the
offset value in increments of 20 units. The single arrows, in all cases, move the adjustment value
in increments of 1 unit. You can also slide the indicators manually for gross adjustment.
Timing
The timing page adjusts the total delay of the video signal:
There are 3 sliders. These control, respectively, the vertical offset (in lines), the horizontal offset
(in μsec) and frame delay (in number of frames).
The double arrows move the vertical offset value (and the indicator) in increments of 2 lines. The
double arrows move the horizontal offset value in increments of 0.0333 μs, rounded off to the