Grass Valley NV8500 Series v.3.5 - Manual (Page 235)

219
NV8500 Series
User’s Guide
Control Cards
The following is a list of control cards for standard and hybrid systems:
Monitor Cards
The following is a list of monitor cards and corresponding backplanes:
Power Supply
The following is a list of power supply modules and cables necessary for making power
connections:
Frame Expansion
The following are the cable and the terminator used when making expansion signal connec-
tions for an NV8576-Plus:
Part Number Card Class Description
8500-NV Standard NV8576, NV8280, and NV8144 (EM0666)
8500H-NV Standard and
hybrid NV8576, NV8280, and NV8144 (EM0833)
Part Number Card Class Description Backplane
8500-MNTR Standard and
hybrid 3Gig monitor for the NV8280, NV8576, and
NV8576-Plus Input EM0715
Output EM0714
8500-MNTR Standard and
hybrid 3Gig monitor for NV8144 EM0846
Part Number Description
PS8100 Power supply module (850 Watts)
PS8300 Power supply module (1,350 Watts)
WC0046-00 Power supply monitor cable
WC0123-10 DC power supply cable
WC0154-00 Power supply cable from NV8300 to router
WC0109-00 Cable from NV8144 to power source
WC0157-00 AC cable from NV8300 to power source, 20 amp, twist lock connector
Part Number Description
WC0121 Expansion cable, 4 meters, appx. 13 feet. These come as a set of 128 cables.
WC0084 Two of these RJ-45 terminators are required if you are cross-connecting an NV8576-
Plus that uses EM0666 control cards (i.e., a standard router).
If you are cross-connecting a hybrid router, one that has EM0833 control cards, you
will use BNC coax cable and no termination is required.