Inputs and outputs, Types of input and output – Grass Valley NV8500 Series v.3.5 User Manual
Page 42
26
Inputs and Outputs
Types of Input and Output
Figure 2-1 shows the hybrid port assignments of the coax I/O backplanes:
Fig. 2-1: I/O Backplane Modules As Used for Hybrid I/O
The fiber and WECO backplanes have the same port numbering method as the coax backplanes.
Note that the coax backplanes used for hybrid cards are also used for standard cards. If, for
example, you exchange a standard card for a hybrid card in a particular slot, it is not necessary to
change the backplane, as long as the card is a coax-compatible card.
The video ports of frame sync input backplane modules follow the same pattern as for the
disembedder backplane modules.
The NV8140 is the only router in the NV8500 family that uses 18-connector disembedder (input)
backplanes and 18-connector MADI (3Gig/TDM) input backplanes. (Frame sync input back-
planes are not available for the NV8140.)
See
on page 42 for IP gateway signal numbering and ordering.
See
on page 185 for M3 signal numbering and ordering.
Disembedder
Disembedder,*
Embedder
Embedder
Expansion Output
3Gig/TDM
Input
3Gig/TDM
Input,* Output
3Gig/TDM
Expansion Output
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
Video
(with
Emb.
Audio)
Video
(with
Emb.
Audio)
Video
(with
Emb.
Audio)
Video
(with
Emb.
Audio)
unused
unused
unused
unused
Video
Video
Video
Video
MADI
MADI
MADI
MADI