Grass Valley NewsShare v.5.5 - Manual (Page 57)

Setting IP Addresses
Digital News Production 55
6. Using Internet Explorer, logon to the NewsShare NAS application.
The default address is 192.168.50.20:9890.
7. Configure your network ports according to the type of NewsShare NAS
system you have:
- For the NewsShare NAS Fibre Channel Network system, select
Network | Network Port Configuration .
- For the NewsShare NAS Serial ATA Network system, select
Network | Network Ports .
8. Change the IP addresses for both Nodes, if applicable—Public IP, Private IP,
and Netmask, for your network.
NOTE: Private IP is only available with the NewsShare NAS Fibre
Channel Network system.
An example of an appropriate scheme is:
9. Click Save .
10. Reboot your computer.
11. Follow steps 1-5 and reset the IP address for your computer back to its
original settings.
Name Node1 Node2
Public IP 192.168.50.20 192.168.50.21
Private IP 192.168.50.22 192.168.50.23
Netmask 255.255.0.0