Grass Valley NewsShare v.5.5 - Manual (Page 56)

Chapter 7 Setting Up the NAS System
54 Digital News Production
Setting IP Addresses
To set the IP address for the NAS Servers:
1. On any PC on your network with Internet access, right-click on Network
Places and select Properties .
2. In the Network & Dial-up Connections window, select the Local Area
Connection for your primary public ethernet port, right-click and select
Properties .
3. In that Properties window, select Internet Protocol (TCP/IP) and click the
Properties button.
The Internet Protocol (TCP/IP) Properties window opens:
4. Click Use the following IP address: and set the IP address and Subnet
mask to the Thomson Grass Valley settings, using an unassigned address on
the same subnet.
5. Click OK twice.