Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 76)

76 Aurora Edit Installation and Configuration Guide September 20, 2007
Chapter 6 Installing and Creating SmartBins
d. Select the number of Maximum Transfers per server from the drop-down list.
If you are installing this software on a DSM, the maximum number of transfers
is 4.
e. Check Delete movies after __ hours , and enter the number of hours after a
transfer is complete for media to remain in the database before being
automatically removed from the video server, not the Aurora Edit.
f. Click OK to close Server Settings.
g. Repeat steps a-f for additional servers.
h. Select the Total Maximum Transfers from the drop-down list.
The Total Maximum Transfers is the total amount of streams for this particular
instance of the SmartBins Service. Select
4 if the SmartBins Service is installed
on a DSM and select 6 if the SmartBins Service is installed on a standalone PC.
NOTE: Increasing the number of Total Maximum Transfers affects the
bandwidth on the NAS system.
i. Enter the name of the License Server; this is the same as the License Server in
Aurora Edit (see “Setting General Options” on page 54 ).
j. Click OK to close the setup tool.
The SmartBins Service restarts.