Gpi pin assignments – Grass Valley Aurora Edit LD v.6.3 Installation User Manual
Page 25
September 20, 2007
Aurora Edit Installation and Configuration Guide
25
GPI Pin Assignments
GPI Pin Assignments
There are 2 COM port connectors on the backplane of the Aurora Edit workstation,
COM1 and COM2, which are located alongside the other motherboard connectors.
Both COM ports are generally used for the Aurora Playout application but can also
be used with Aurora Edit. See the User Guide for setting up the GPI Commands in
relationship to the pins shown in the illustration and table below.
Pin
COM1 Function
COM2 Function
1
-
-
2
-
-
3
-
-
4
-
-
5
Chassis Ground
Chassis Ground
6
IN 2
IN 5
7
+12V
+12V
8
IN 1
IN 4
9
IN 3
IN 6
Provide +5 to +24 volts to an input to trigger.
This manual is related to the following products: