Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 61)

September 20, 2007 Aurora Edit Installation and Configuration Guide 61
Setting Options
Setting Graphics Options
Setting Controller Options
Setting Aurora Playout Options
Setting Description
Initial Duration Enter the initial duration for a graphic placed on the Timeline; 5 seconds is the
default duration.
Fade In Enter the number of frames over which the graphic fades in to the clip; 10 frames
is the default setting.
Fade Out Enter the number of frames over which the graphic fades out to the next clip; 10
frames is the default setting.
Editor Indicates whether the Chyron plug-in is installed with the system.
Templates Folder Enter the path to the Graphics template directory.
Enable Right to Left Input
Mode Check Enable Right to Left Input Mode to use the Title tool with bidirectional
languages, allowing users to enter text that reads from right to left. This setting
is off by default.
Setting Options Description
422 Controller Comm Port None
COM1
through COM10
If you are using an external controller with Aurora
Edit, select the COM port to which it is connected.
Otherwise, select None.
USB Controller Comm Port
USB Controller Comm Port
Reserve COM1 and COM2 for GPIO Check this option to keep COM ports 1 and 2
available for GPIO triggers to control the Aurora
Edit playback channel; off by default.
Setting Description
Primary Database Server Enter the server name where the primary Aurora Playout database resides.
Backup Database Server Enter the server name where the secondary Aurora Playout database resides.
XMOS Server Enter the name of the computer hosting the XMOS Server.
Thumbnail Path Enter the path to the thumbnail directory.