Installing the aurora edit software – Grass Valley Aurora Edit LD v.6.3 Installation User Manual
Page 36

36
Aurora Edit Installation and Configuration Guide
September 20, 2007
Chapter 4 Installing Software
Installing the Aurora Edit Software
The Aurora Edit software should already be installed on your workstation when your
system arrives. If you ever need to install it, follow these instructions.
NOTE: If you have an old version of NewsEdit or Aurora Edit software installed on
your workstation, you first need to uninstall it. To uninstall software, go to your
desktop and click
Start | Control Panel | Add or Remove Programs
.
To install the Aurora Edit software:
1. Insert the Aurora Edit CD into your CD drive and navigate to
Software Installs |
DNP Application
.
2. Double-click on
SetupAuroraEdit.exe
.
The Profile Software Not Detected Window appears:
3. Click
OK.
The Profile Software loads automatically.
4. Follow the directions below for using Local or Shared Storage.
If your system is part of an Open SAN system or connected to Network Attached
Storage (NAS) or a K2 Server, use the instructions for Shared Storage; otherwise, use
the instructions for Local Storage.