Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 38)

38 Aurora Edit Installation and Configuration Guide September 20, 2007
Chapter 4 Installing Software
Shared Storage System
Follow these instructions when installing the Aurora Edit software on a system using
shared storage that is part of an Open SAN system or connected to a K2 Server or
Network Attached Storage (NAS):
On this screen... Do this...
Welcome Click Next to continue.
License Agreement Click I Agree and click Next .
Select Destination Directory Click Next to leave the destination directory set at the default location:
C:\Program Files\Grass Valley\Aurora Edit
NOTE: If you wish to change the default directory, click Browse . Scroll
through the pulldown list to the desired directory , click on it to select it,
click OK. The change appears in the Select Destination Directory window,
click on it to select it, click OK. The change appears in the Select
Destination Directory. Click
Next to continue.
Allow Frame Skipping Check Allow Frame Skipping During Playback if your system is a 2.4
GHz NewsEdit PC or a Dell 800 or 810 laptop. On these older systems, this
setting allows the video to skip every other frame, making the video
smoother.
Select Shared or Local Installation Click Shared and click Next .
To enable security (optional) on your shared database, check Domain
Security (see “Setting Security Permissions” on page 62 for a description
of the security features).
K2 Server Check Check K2 Server Present if you are using a K2 Server and click Next .
Specify the Servers for the Shared Database Type the names of the primary and secondary (if applicable) File System
Managers (FSM) or Database System Managers (DSM) that will be used
for the shared database.
If you are not using a secondary server, leave the Server 2 field blank.
Click Next to continue.
Specify Directory for Shared Video and
Audio Files Click Next to leave the destination directory set at the default location:
V:\VibrintAVFiles
NOTE: If you wish to change the default directory, click Browse . Scroll
through the pulldown list to the desired directory and double-click on it.
Click
Next to continue.
Specify Directory for AV Cache Files Click Next to leave the destination directory set at the default location:
D:\VibrintAVCache
NOTE: If you wish to change the default directory, click Browse . Scroll
through the pulldown list to the desired directory , click on it to select it,
click
OK . The change appears in the Specify Directory for AV Cache Files
window. Click Next to continue.