Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 75)

September 20, 2007 Aurora Edit Installation and Configuration Guide 75
Running the SmartBins Setup Tool
Running the SmartBins Setup Tool
If you are using SmartBins on a NAS or K2 system, you need to configure your
M-Series iVDR(s), Profile XP, or K2 Media Server to use SmartBins.
NOTE: You don’t need to configure SmartBins on an Open SAN system.
To configure the SmartBins Service on a NAS or K2 system:
1. Go to Start | Programs | Aurora 6.3 | SmartBins Setup Tool .
The SmartBins Setup Tool opens.
2. Select the type(s) of SmartBins you are using with Aurora Edit.
3. For Shared SmartBins and Media Import SmartBins, no other configuration is
needed. Click OK to close the tool.
4. For Transfer SmartBins:
a. Click Add .
The Edit Server Settings window appears:
b. Enter the name of the Profile Server, M-Series iVDR, or K2 Media Client you
are using.
c. Select the Server Type from the drop-down list.