Grass Valley Aurora Edit LD v.6.3 Installation - Manual (Page 57)

September 20, 2007 Aurora Edit Installation and Configuration Guide 57
Setting Options
Setting Up Send Locations
After completing a sequence you can send it to a playout machine or to a network
video server. To send completed sequences or individual clips, you first need to
configure Aurora Edit with each of your send locations.
A send location can be another Aurora Edit workstation, a Media Server, or a Bin you
specify. If you want to store completed sequences on your computer, you can also add
a send location for your PC.
To set up a send location:
1. Click Add .
The Add Named Destination to Send List window appears.
2. Enter the name of the send location.
3. Select the type of location from the drop-down list:
4. Configure the send location based on the location type:
Send Type Description
Vibrint Select Vibrint when the send location is another Aurora Edit, FeedClip, or an
Aurora Playout system.
Profile Select Profile when the send location is a Profile Media Server, a K2 Server, or
an M-Series iVDR.
Publish Select when you want to transfer sequences.
GXF ftp Select GXF ftp to send the completed sequence as a GXF stream which can be
used for a generic FTP site.
GXF file Select GXF file to send the completed sequence as a GXF file.
DV Video ES Select DV Video ES to send the completed sequence as a DV video elementary
stream; used for Publison NewsMix.
Send Type Option Description
Vibrint Use Video ID Check Use Video ID if you will be linking to stories on
a Newsroom Computer System (NRCS) that contain
Video IDs. When you send an Aurora Edit sequence to
this location, the system uses the Video ID for the name
of the file that gets sent.
Include Graphics Check Include Graphics if you want all graphics to
remain with the sequence.
Send to Click Browse and select the file destination path.