Grass Valley Acappella v.3.2.4 - Manual (Page 83)

Acappella — Instruction Manual 83
Acappella Configuration Pages
The order of levels in the configuration of the two frames must match. If the
single Level frame is configured as Level 1, it has to be Level 1 on all frames
in the system. You can create systems with up to 4 Levels. To change the
order of the Levels use the Move column radio buttons.
Figure 34. Three Level Local Frame with One Remote Level
Create a Four Level HD Wideband System
This example uses four separate frames of 16x16 SD Digital Video to create
a four level system.
1. Select first frame, enable 3 remote Levels on the Remote Config Web
page.