Grass Valley Acappella v.3.2.4 - Manual (Page 111)

Acappella — Instruction Manual 111
SNMP Monitoring
Source and Destination Signal Loss Configuration
Digital signal loss SNMP traps are configured using the Acappella web
pages. The SNMP settings are only available if SNMP is licensed on that
matrix. Analog signal loss cannot be detected or reported.
The web pages available for configuration depend on the matrix type. For
example, if the matrix is digital video only, there will be no AES configura-
tion web page.
Video Destination and Source SNMP configuration is accessed via the
Video Config web page ( Figure 54 and Figure 55 ). AES SNMP is accessed via
the AES Config web page ( Figure 56 on page 113 and Figure 57 on page 114 ).
Clicking on the Go to Input Config or Go to Output Config button toggles the
display between the Source and Destination configuration pages. The
Signal Alarm can be turned on or off for each Destination and Source.
Figure 54. Video Destination SNMP Configuration