Grass Valley Acappella v.3.2.4 - Manual (Page 49)

Acappella — Instruction Manual 49
Source Button
Source Button
Single Source Button Action
Press and release of a single Source button causes the following actions:
• Connects a Source to the active Destination on all active Levels,
• Tallys only the active Source at High Tally illumination intensity,
• All other Sources become inactive at Backlight Tally illumination inten-
sity,
If a Breakaway,
• The single Source button is High Tally,
• The left most active Level button is High Tally,
• The Breakaway level is low tally, and
• Inactive Level Tally remains at Backlight intensity,
If Chop function is active (Local Panel),
• Press and release of a Source button inactivates the Chop, and
• Connects the Source to the active Destination,
Note Chop is a toggle between two Sources to a single Destination.
If Destination Gang and All Levels are active (Local Panel),
• Press and release of a Source button connects that Source to all Destina-
tions in the Gang,
• All Destination buttons (in the Gang) are High Tally, and
• Active All Level button Tally is updated to High Tally,
If Destination Gang is active, but not All Levels active (Local Panel),
• Press and release of a Source button connects that Source to all Destina-
tions in the Gang for only the active Levels,
• The individual Destination buttons (in the Gang) are either Low Tally to
indicate Breakaway, or High Tally to indicate no Breakaway, and
• All active Level button Tally is updated to indicate either Breakaway as
Low Tally, or no Breakaway as High Tally.
Note Chop is not available on a Remote Panel. The Chop will only be on the Local
Panel and on the Local Levels output. It will not change the output of the
Remote Levels in the system. However, if any Source is selected by any panel
in the system it will stop the Chop.