Grass Valley Acappella v.3.2.4 - Manual (Page 72)

72 Acappella — Instruction Manual
Section 4 — Software and Configuration
rect, then the signal would be in Bypass with no reclocking and the Output
would report Not Locked.
After selecting a new reclocking rate, the router will try to lock the Output
to that rate. It may take several seconds and clicking the
Refresh button to
see the change. Figure 25 shows Bypass and Auto settings. If a signal rate
such as 270 Mb/s is selected as the Reclocking Rate then the Output would
show
270 Mb/s .