Grass Valley Acappella v.3.2.4 - Manual (Page 116)

116 Acappella — Instruction Manual
Appendix A — Specifications
SD Digital Video
Wideband Digital Video
Table 10. SD Digital Video Specifications
SD Inputs
Type Serial digital video conforming to SMPTE 259M
Connector BNC
Return loss > 15 dB (10 MHz- 540 MHz)
Impedance 75 ohms
Cable equalization Automatic ≤ 300 meters of Belden 1694A or equivalent for data rate ≤ 540 Mbps
SD Outputs
Type Serial digital video conforming to SMPTE 259M
Connector BNC
Return loss > 15 dB (10 MHz-540 MHz)
Signal amplitude 800 mV ±10% when terminated into 75 ohm
Impedance 75 ohms
Operational Modes
Reclocking SR Automatic or manual selection of 143 Mbps, 270 Mbps, 360 Mbps, & 540 Mbps
Non reclocking S Non-reclocked operation or bypass switched from 10 Mbps to 540 Mbps with signals
that have a maximum ones/zeros ratio of 20:1
DVB-ASI
Supported Polarity is preserved.
Table 11. Wideband Digital Video Specifications
Wideband Inputs
Type Serial digital video conforming to SMPTE 292M
Connector BNC
Return loss > 15dB (10 MHz-1.5GHz)
Impedance 75 ohms
Cable equalization Automatic ≤ 100 meters of Belden 1694A or equivalent for data rate ≤ 1.485 Gbps
Wideband Outputs
Type Serial digital video conforming to SMPTE 259M or SMPTE 292M
Connector BNC
Return loss > 15dB (10 MHz-1.5GHz)
Signal amplitude 800 mV ±10% when terminated into 75 ohm
Impedance 75 ohms
Operational Modes
Reclocking Automatic or manual selection of 143 Mbps, 270 Mbps, 360 Mbps, 540 Mbps, & 1.485 Gbps
DVB-ASI
Supported Polarity is preserved.