Grass Valley Acappella v.3.2.4 - Manual (Page 63)

Acappella — Instruction Manual 63
NetConfig
4. Click Apply Changes . The device resets, and the new IP address will be
reported in the left pane of NetConfig screen.
Figure 17. New IP Address
When all devices have unique IP addresses, it can be extremely helpful to
label each device with its currently assigned IP address. Sticky labels that
can be removed are advisable, since the IP address may be changed in the
future. To identify a specific remote panel when several are connected at
once, send a reset command to a panel and see which front panel buttons
go off and back on.
Load Software
Use NetConfig to load software to Acappella routers and Acappella
Remote Panels.
1. Open NetConfig and select the Load SW button in the toolbar.
Figure 18. Load SW
Load SW button